Send Email
Send SMS
Search
Hindustan Fibre Tech


FRP Degasifiers

Degasifiers Remove dissolved gases and other contaminants for high purity water. Some industrial applications and processes require ultra pure water with extremely low levels of dissolved gases and other contaminants. Degasification / decarbonation increase the life of the process equipment by preventing or controlling corrosion.
Degasifiers working Principle:
The basic principle of degasification is to force a column of air up-flow over a thin film or small drops of down-flow water. This procedure will oxidize iron and manganese, allow gases such as carbon dioxide, methane and hydrogen sulfide to escape and to let volatile substances such as phenol vaporize into the moving stream of air.

Because of its multi-functions, the degasifier is sometimes referred to as an aerator or a de-carbonator. The degasifier does not remove oxygen or heat water. Therefore, it is not a substitute for a boiler feed-water deaerator. This will extend the operating runs and significantly reduce the load on downstream strong base anion exchangers or de-aerators.

For volatile organic compound removal, the degasifier is efficient by itself or can be followed by granular activated carbon filters for almost complete removal. Hydrogen sulfide gas is seldom completely removed by degasification because it is readily converted to non-volatile sulfides in the degasifier. Auxiliary equipment such as a chlorinator and activated carbon filtration is required for complete hydrogen sulfide removal.

The degasifier has three main components: the tower, the blower and the sump. The tower is filled with a large surface area packing that breaks up the falling column of water into a thin film and small drops. The blower forces a stream of air upflow through the water and out through the vent pipe. The sump receives the degasified water and stores it for a few minutes before it is pumped to the point of use.

The degasifier is mechanical and needs no chemical treatment. The only operating cost is the electrical energy for the blower motor.

FRP Degasifiers System

REQUEST CALLBACK

FRP Degasifiers System
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2.15 Lakh / SetGet Latest Price

Product Details:
Minimum Order Quantity01 Set
Body MaterialFRP
BrandCOMPOPLAST
ColorBlue
ShapeOther
Max Pressure150 mm WC
Usage/ApplicationWater Treatment Plats

Forced Draft Degasifiers are used to remove unwanted gases from supply water. The degasifier removes the gases by passing the water over a packing media that helps the water form a thin film over the surface area of the tower. A counter current airflow is introduced at the bottom of the tower and travels up the stack through the descending flow of water. The gases are stripped as the air passes over the surface area of the water.

Degasifiers are used in demineralizer applications to strip CO2 following a strong acid cation exchanger or softening application. They can also be used as an economical way to strip hydrogen sulfide or volatile organic compounds (VOC).
HFT has a complete line of Forced Draft Degasifiers available.


Materials of Construction:

We have the infrastructure and the facilities of the manufacturer of FRP Degasser Towers Using Isopthalic Polyester, Bisphenol Polyester, Vinyl Ester and Epoxy Resins.


Feature:
  • Durable.
  • Weather resistant.
  • Easy maintenance.
  • Trouble-free usage.
  • Long-term service.
  • Corrosion free construction.
  • Simplicity of installation and setting up.
  • Dependable automatic controls all contribute to long.
  • rouble free performance.

Our Product Key Words:-

FRP Degasifiers in Chennai, FRP Degasifiers in Trichy, FRP Degasifiers in Madurai, FRP Degasifiers in Coimbatore, FRP Degasifiers in Pondicherry, FRP Degasifiers in Tamil Nadu, FRP Degasifiers in Kerala, FRP Degasifiers in Andhra Pradesh.
Yes! I am interested

Degasifier Systems for Water Treatment Plants

REQUEST CALLBACK

Degasifier Systems for Water Treatment Plants
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.25 Lakh / SetGet Latest Price

Product Details:
Minimum Order Quantity01 Set
TypeWaste Water Treatment
Installation TypePrefabricated
Water SourceWaste Water Treatment
BrandCOMPOPLAST
Capacity Inlet Flow Rate1000 m3/hour, 500 m3/hour, 100 m3/hour
Treated Water Qualityas per our design
ConditionNew
Automation GradeSemi-Automatic
Surface Finishsmooth surface for both side

Being the renowned names in the industry, we offer an extensive range of FRP Degasifier Tower that is manufactured with utmost accuracy. They are performance based and are easy to install. Our entire product range requires minimum power consumption and is delivered in different grades and dimensions.

Features:

  • Light in weight
  • Easy to install
  • Non metallic construction
  • supplied along with non metallic centrifugal blowers
  • customized product, can be designs as per requirement and specification

 Widely used for:

  • Degasification of H2S
  • Degasification of CO2
  • Before anion exchanger to reduce the anionic load in DM plant

Additional Information:

  • Production Capacity: as per customer requirement
  • Delivery Time: foru weeks
  • Packaging Details: Standard
  • Yes! I am interested

    Degasifiers

    REQUEST CALLBACK

    Degasifiers
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.65 Lakh / SetGet Latest Price

    Product Details:
    Minimum Order Quantity01 Set
    Design StandardBS EN 13121
    Design Temperature55 Deg
    ScopeDesign,Manufacture,Supply & Installation
    ColorBlue and White
    SizeCustomized
    BrandCOMPOPLAST

    HFT Advanced Filtration Systems designs, manufactures and installs Degasifier  Systems for CO2 removal in various water treatment plants. These Degasser units are customized and can be made on order depending upon the flow rate of your system. As required, we manufacture both single stage and double stage degassing plants with Degasser Towers made from FRP.

    Additional Information:

  • Production Capacity: as per customer requirement
  • Delivery Time: four weeks
  • Packaging Details: Standard
  • Yes! I am interested

    Compoplast FRP Degasifier For Co2 Removal

    REQUEST CALLBACK

    Compoplast FRP Degasifier For Co2 Removal
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 85,000 / SetGet Latest Price

    Product Details:
    Minimum Order Quantity01 Set
    BrandCOMPOPLAST
    Colorany Color
    Design StandardBSEN13121

    Degasifier n integral part of any demineralization plant, where it is generally placed between cation and anion exchanges and removes Carbon Dioxide, which is generated by dissociation of carbonic acid at cation outlet water. In this Degassing processes, Degasifier Tower is utilized, which is made from either FRP. Low air pressure is generated at the bottom of the tower that drives out CO2 and the degassed water is collected in a sump beneath the tower.


    Additional Information:

  • Production Capacity: as per customer requirement
  • Delivery Time: four weeks
  • Yes! I am interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Hindustan Fibre Tech
    S.R Krishna Moorthy
    Plot No. T 12B, SIDCO, Women Industrial Estate , Thirumullaivoyal,
    Chennai - 600062, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 75%
    Share Us :
    F G T L



    Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us

    © Hindustan Fibre Tech. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Hindustan Fibre Tech